Timer0

SwordfishUser.Timer0 History

Hide minor edits - Show changes to markup

Changed line 27 from:
     Disable(ISR)
to:
     INTCON.7=0
Changed line 31 from:
     Enable(ISR)
to:
     INTCON.7=1
Changed lines 4-5 from:

It can be used via interrupts or polling methods.

to:

It can be used via interrupts or polling methods. The make calculating the appropriate preload/prescaler values, I suggest the fabulous PicMultiCalc tool from MisterE.

Added line 26:
     Disable(ISR)
Added line 30:
     Enable(ISR)
Deleted line 122:
       intcon.7=0
Deleted line 126:
       intcon.7=1
Added lines 1-173:

Timer0 Module Available for SwordFish.

This module was designed and tested using the EasyPIC3 (18F452). It can be used via interrupts or polling methods. For interrupts, see the example code for calling inside a master interrupt service handler.

Example Code

// device and clock...
Device = 18F452
Clock = 32

Config
    OSC=HSPLL

Include "DL_Timer0.bas"
Include "utils.bas"

Dim LED As PORTD.0

Event LEDFlash()
      Toggle(LED)
End Event

Interrupt ISR()
     If Timer0.InterruptFlag =1 Then
        Timer0.SInterrupt()      
     EndIf
End Interrupt

// main
Utils.SetAllDigital()
Output(LED)

Timer0.Initialize(LEDFlash)
Timer0.SetPrescaler(Timer0.PS256)
Timer0.EightBit = 0
Timer0.Preload=49911
Timer0.EnableInterrupt()
Timer0.Enabled()
Enable(ISR)

While true
Wend

Module Code

{
*****************************************************************************
*  Name    : Timer0.BAS                                                     *
*  Author  : Darryl Quinn                                                   *
*  Notice  : Copyright (c) 2008 Darryl Quinn                                *
*          : All Rights Reserved                                            *
*  Date    : 4/11/2008                                                      *
*  Version : 1.0                                                            *
*  Notes   :                                                                *
*          :                                                                *
*****************************************************************************
}

Module Timer0

Type TEvent = Event()

Public Const 
      SRCInternal = 0,
      SRCPIn = 1,
      EDGEFalling = 1,
      EDGERising = 0,
      PSDisabled = 1,
      PSEnabled = 0,
      PS256=7,
      PS128=6,
      PS64=5,
      PS32=4,
      PS16=3,
      PS8=2,
      PS4=1,
      PS2=0

Dim FPreload As Word,
    FPrescaler As Byte,
    FEnabled As T0CON.7,
    FInterrupt As INTCON.5,
    OnISR As TEvent

Public Dim 
       Preload As FPreload,

       EightBit As T0CON.6,
       Source As T0CON.5,
       Edge As T0CON.4,
       PrescalerEnabled As T0CON.3,

       InterruptFlag As INTCON.2

Public Sub Enabled()
       TMR0L = FPreload
       FEnabled=1
End Sub

Public Sub Disabled()
       FEnabled=0
End Sub

Public Sub EnableInterrupt()
       FInterrupt=1
End Sub

Public Sub DisableInterrupt()
       FInterrupt=0
End Sub

Public Sub ClearInterrupt()
       InterruptFlag=0
End Sub

Public Sub SInterrupt()
       intcon.7=0
       OnISR()
       TMR0L = FPreload.Byte0
       TMR0H = FPreload.Byte1
       ClearInterrupt()
       intcon.7=1
End Sub

Public Sub SetPrescaler(ByVal pPrescaler As Byte)
       Select pPrescaler
              Case PS2
                   FPrescaler = PS2
                   PrescalerEnabled=PSEnabled
              Case PS4
                   FPrescaler = PS4
                   PrescalerEnabled=PSEnabled
              Case PS8
                   FPrescaler = PS8
                   PrescalerEnabled=PSEnabled
              Case PS16
                   FPrescaler = PS16
                   PrescalerEnabled=PSEnabled
              Case PS32
                   FPrescaler = PS32
                   PrescalerEnabled=PSEnabled
              Case PS64
                   FPrescaler = PS64
                   PrescalerEnabled=PSEnabled
              Case PS128
                   FPrescaler = PS128
                   PrescalerEnabled=PSEnabled
              Case PS256
                   FPrescaler = PS256
                   PrescalerEnabled=PSEnabled
              Else
                   PrescalerEnabled=PSDisabled
       End Select
       T0CON.0=FPrescaler.0
       T0CON.1=FPrescaler.1
       T0CON.2=FPrescaler.2
End Sub


Public Sub Initialize(pEvent As TEvent = 0)
       Disabled()
       EightBit = 1
       Source = SRCInternal
       PrescalerEnabled = PSDisabled
       DisableInterrupt()
       OnISR = pEvent       
End Sub