From Swordfish Wiki

SwordfishUser: FirewingLoader

Writing Swordfish code for a Firewing development board is really easy. In fact, it's just the same as writing code targeted for an 18F25K22 device. However, there is a really useful module here which can speed up your development times. Code written, how do you upload to a Firewing board? Just follow these steps:

Now you just configure the options for each screen

the -cFirewing option will auto detect the port the Firewing development board is connected to. You can use -cCOM<value> instead if you want to specify a COM port number. If you haven't installed your USB drivers yet for Firewing then take a look here.

Retrieved from
Page last modified on March 17, 2014, at 11:51 AM