General discussion relating to the library modules supplied with the compiler
Moderators: David Barker, Jerry Messina
-
octal
- Registered User
- Posts: 586
- Joined: Thu Jan 11, 2007 12:49 pm
- Location: Paris IDF
-
Contact:
Post
by octal » Wed Aug 08, 2007 9:01 am
Hi,
Does anyone know if or where I can find a vendor or provider of PIC 18F2550 or 4550 mounted on an USB Key (case)?
The aim is to be able to create our own USB keys for Software protection or PC locking (logger) ....
Regards
Octal
-
Doj
- Posts: 362
- Joined: Wed Apr 11, 2007 10:18 pm
- Location: East Sussex
Post
by Doj » Wed Aug 08, 2007 9:23 am
I think I saw some USB Key hardware on the FTDI website using a chip they have manufactured.
If you do not find a supplier I could do a PCB for you (on a comercial basis) if you can not create it yourself.
-
octal
- Registered User
- Posts: 586
- Joined: Thu Jan 11, 2007 12:49 pm
- Location: Paris IDF
-
Contact:
Post
by octal » Wed Aug 08, 2007 9:26 am
Thank you Doj. But i wanted a full made key with MICROCHIP components because I know how to program them.
In the case if I create a pcb alone I'll also have the same problem, to find a fine little box similar to usb keys, and this is not easy.
BTW. Do you manifacture PCB ?
Regards
Octal
-
Doj
- Posts: 362
- Joined: Wed Apr 11, 2007 10:18 pm
- Location: East Sussex
Post
by Doj » Thu Aug 09, 2007 2:59 am
OK octal the box will indeed be difficult to find, good boxes always cost so much, sometimes more than the electronics!
I design, develop and manufacture products but not the PCB itself, too messy and difficult in large numbers, we do prototypes in house but not for customers to buy!