I want to use ms(2) (3 elements) than denote the LED color
In the program ms is incremented then decremented.
The code I have posted will turn on all 3 LEDs and using the PWM they start out dim until full brightness then dim to off
I want to use ms(0) as red, ms(1) as green and ms(2) as blue. then insert different starting values instead of 0 so the three LEDs flicker at different brightness
Code: Select all
Device = 18F1320
Clock = 8
Include "IntOSC8.bas"
Include "RandGen.bas"
Include "Utils.bas"
Dim TMR2IE As PIE1.1, // TMR2 interrupt enable
TMR2IF As PIR1.1, // TMR2 overflow flag
TMR2ON As T2CON.2, // Enables TMR2 to begin incrementing
Signal_Pin As PORTA.0 // Signal output to frequency meter
Dim Red_Pin As PORTB.0,
Green_Pin As PORTB.1,
Blue_Pin As PORTB.2,
Red_Duty As Byte,
Green_Duty As Byte,
Blue_Duty As Byte,
Red_DutyVal As Byte,
Green_DutyVal As Byte,
Blue_DutyVal As Byte,
RandomVal As Byte
Dim uS As Word,
//mS(2) As Word get first error here?? more i'm sure
dim ms(3) As byte
//dim mSg As Word
Interrupt TMR2_Interrupt()
High(Signal_Pin)
Save(0) // Back up system variables
If TMR2IF = 1 Then // Check if the interrupt was from TMR2
TMR2IF = 0 // Clear the TMR2 interrupt flag
uS = uS + 50
If uS >= 1000 Then
uS = uS - 1000
Inc mS(3)
// IncmS(b)
// IncmS(g)
EndIf
Inc(Red_DutyVal)
Inc(Green_DutyVal)
Inc(Blue_DutyVal)
If Red_DutyVal > Red_Duty Or Red_Duty = 0 Then
Red_Pin = 0
Else
Red_Pin = 1
EndIf
If Green_DutyVal > Green_Duty Or Green_Duty = 0 Then
Green_Pin = 0
Else
Green_Pin = 1
EndIf
If Blue_DutyVal > Blue_Duty Or Blue_Duty = 0 Then
Blue_Pin = 0
Else
Blue_Pin = 1
EndIf
EndIf //
Restore // Restore system variables
Low(Signal_Pin)
End Interrupt
Private Sub TMR2_Initialize()
TMR2ON = 0 // Disable TMR2
TMR2IE = 0 // Turn off TMR2 interrupts
PR2 = 149 // TMR2 Period register PR2
T2CON = %00000001 // T2CON 0:1 = Prescale
// 00 = Prescale is 1:1
// 01 = Prescale is 1:4
// 1x = Prescale is 1:16
// 3:6 = Postscale
// 0000 = 1:1 postscale
// 0001 = 1:2 postscale
// 0010 = 1:3 postscale...
// 1111 = 1:16 postscale
TMR2 = 0 // Reset TMR2 Value
TMR2IE = 1 // Enable TMR2 interrupts
TMR2ON = 1 // Enable TMR2 to increment
Enable(TMR2_Interrupt)
End Sub
// Start Of Program...
Low(Red_Pin)
Low(Green_Pin)
Low(Blue_Pin)
Red_Duty = 0
Green_Duty = 2
Blue_Duty = 0
Red_DutyVal = 0
Green_DutyVal = 4
Blue_DutyVal = 0
uS = 0
mS = 0
RandGen.Initialize(128) // Initialize the Random Number generator
TMR2_Initialize // Setup and enable TMR2
While True // Create an infinite loop
RandomVal = RandGen.Rand // Grab a random number from 0 to 255
// Select RandomVal // Find out what colour to increase/decrease
//Case 0 To 42
While Red_Duty < 255
And Green_Duty < 255
And Blue_Duty < 255
mS =0
//mS(b) = 0
//mS(g) = 0
Repeat
Until mS = 19
//And mS(b) = 19
// And mS(g) = 19
Inc(Red_Duty)
Inc(Green_Duty)
Inc(Blue_Duty)
Wend
// Case 43 To 84
While Red_Duty > 0
And Green_Duty > 0
And Blue_Duty > 0
mS = 0
// mS = 0
// mSg = 0
Repeat
Until mS = 19
//Until mS(b) = 19
// Until mS(g) = 19
Dec(Red_Duty)
Dec(Green_Duty)
Dec(Blue_Duty)
Wend
// Case 84 To 127
//While Green_Duty < 255
// mS = 0
// Repeat
// Until mS = 19
// Inc(Green_Duty)
//Wend
// Case 128 To 170
// While Green_Duty > 0
// mS = 0
// Repeat
// Until mS = 19
// Dec(Green_Duty)
//Wend
// Case 170 To 212
// and Blue_Duty < 255
// mS = 0
// Repeat
// Until mS = 19
// Inc(Blue_Duty)
// Wend
// Case 212 To 255
// While Blue_Duty > 0
// mS = 0
// Repeat
// Until mS = 19
// Dec(Blue_Duty)
// Wend
// End Select
Wend