Easypic 3 Bord und the USB key

Discuss the Integrated Development Environment (IDE)

Moderators: David Barker, Jerry Messina

Post Reply
speed64
Registered User
Registered User
Posts: 13
Joined: Mon Jul 09, 2007 10:45 am
Location: Germany Barßel

Easypic 3 Bord und the USB key

Post by speed64 » Thu Jul 19, 2007 8:20 am

Hello all,

I have a problem with the Easypic 3 Bord und the USB key.
Each hardware alone works fine, but both together send mistake-message from windows: "code is 10, the driver of easy pic 3 can' t start."
My computer has 8 x USB2 and Windows XP.
Please, could anybody help me.
Top
User avatar
David Barker
Swordfish Developer
Posts: 1214
Joined: Tue Oct 03, 2006 7:01 pm
Location: Saltburn by the Sea, UK
Contact:
Contact David Barker

Post by David Barker » Thu Jul 19, 2007 8:24 am

I believe Octal has already commented in another thread...

http://www.sfcompiler.co.uk/forum/viewtopic.php?t=283
Top
xor
Posts: 286
Joined: Sun Nov 05, 2006 1:15 pm
Location: NYC
Contact:
Contact xor

Post by xor » Sat Jul 21, 2007 1:40 pm

The PICFlash USB programmer on the board is high bandwidth and should be connected directly to its own USB controller port. Your PC likely has 2 or more USB controllers. I think new releases of the programmers alleviate the problem to some extent.
Top
speed64
Registered User
Registered User
Posts: 13
Joined: Mon Jul 09, 2007 10:45 am
Location: Germany Barßel

Re: Easypic 3 Bord und the USB key

Post by speed64 » Wed Aug 08, 2007 1:55 pm

speed64 wrote:Hello all,

I have a problem with the Easypic 3 Bord und the USB key.
Each hardware alone works fine, but both together send mistake-message from windows: "code is 10, the driver of easy pic 3 can' t start."
My computer has 8 x USB2 and Windows XP.
Please, could anybody help me.

I solved now the problem with a new PIC Flash2 Progrmmer and another
computer. Thanks for your responses.

Greeting Speed64
Top
Post Reply

Return to “IDE”