Register & De-Register

Discuss PIC and electronic related things

Moderators: David Barker, Jerry Messina

Post Reply
ggunderson
Posts: 3
Joined: Tue Dec 01, 2015 12:08 am

Register & De-Register

Post by ggunderson » Fri Mar 17, 2017 5:00 pm

Hey guys, I have a question about licensing Swordfish. My license was installed on some older machines with HD failure. I looked up my account info to install Swordfish again and the installer package unfortunately says that Swordfish was still installed on those older machines, however they don't exist anymore, the HD's won't boot (and I'm assuming if they did I could re-run the installer package on those and choose "de-register this machine" option).

So my question is, how do I de-register Swordfish from installation on machines that no longer run?

Your guidance is appreciated!

Graham

User avatar
octal
Registered User
Registered User
Posts: 586
Joined: Thu Jan 11, 2007 12:49 pm
Location: Paris IDF
Contact:

Re: Register & De-Register

Post by octal » Fri Mar 17, 2017 7:56 pm

You better contact mecanique support directly (or PM David on this forum)

Post Reply