Swordfish

No i just wanted you to know that my OW device is working. I copyed your code directly, only thing i did was change some things so it would work on my pic. What i use: Device = 18F452 Clock = 40 Config OSC = HSPLL #option GLCD_MODEL = S1D13700 #option GLCD_MODE = 8080 // GLCD interface mode - 6800 o...

The one you posted..

Yes its definitely a DS18S20.

I tried a new one but still nothing.

OW says the following:

Family : $10 / $F5

00 08 01 9E E7 E7

So the hardware must be ok right?

Its my own PCB design.

What can be wrong?
I have a 4.7k pull up on de data, is that correct?

When i search for the device it finds it every time, so my harware is good, isn't it?

Thnx for your reply. .

I now only get 24,4 Deg.

Strange ..

Hello! I have connected a DS18s20 to my 18F452 but all it returns is -1.05 How is this possible? My code: Device = 18F452 Clock = 10 Config OSC = HSPLL #option GLCD_MODEL = S1D13700 #option GLCD_MODE = 8080 // GLCD interface mode - 6800 or 8080 #option GLCD_DATA = PORTD // data port #option GLCD_EN ...

It works!!

But is don`t understand how this is possible...

i put in context saving in the interupt and it works like a charm now!

How come it did'nt work without it?
In another project of mine it worked without the context saving :s..

greetz!

I dont understand xor`s servo program so i created my own.. My understanding of swordfish is not great so i need to keep it simple but couldn`t get it to work properly... I`m using a standaard servo on a 18F452 @ 20mhz.. My code: { ********************************************************************...

I`m also using a 18F452, but with a 20mhz crystal...

Do i need a 8mhz crystal to get the servo`s spinning with this code or can it be addapted?

I`m experimenting with xor`s code but i`m still not succesfull..

I am using a 20 mhz crystal is that the problem?

Gert

This definitely helps!

Thanks!

Hey!

I want to use 3 servo`s in a project, how do i connect the servo`s to the PIC?
And is the software easily converted to be used on 3 servo`s?

Greetz,
Gert

Hello fellow noob .


I suggest you to start here:

http://www.sfcompiler.co.uk/wiki/pmwiki ... ser.T6963c

Good luck!

I`m working on a RF remote controlled on/off switch. The transmitter works like a charm, made with a 18F452 GLCD and swordfish offcourse! It has a TX RF module attached to Usart. My problem is getting the reciever to work properly. I use a PIC16F628A to recieve the usart data send with the 18F. It w...

Hello! Its me again :roll: . I`m trying send data from pic to pic via usart.bas. I`m having the following problem: When i hard wire the 2 pic`s, TX and RX all goes well! But when i plug the 433mhz thingies it works not nearly as well.. The 433mhz thingies http://pic19.picturetrail.com/VOL1054/619109...