Hi liak,
I'm also using the mikroelektronika EasyPIC boards since Version 3.
But I have to admit, that I missed some things and so I searched for another board.
On EBay- Germany (www.ebay.de) you can search for the following number and you'll see a good board.
130223006000
Good luck.
Christian
Search found 127 matches
- Tue Jun 30, 2009 10:16 am
- Forum: General
- Topic: Development board / tools to purchase
- Replies: 3
- Views: 3537
- Fri Oct 24, 2008 12:48 pm
- Forum: IDE
- Topic: A Virus in the SwordfishIDE.exe?
- Replies: 3
- Views: 3718
- Fri Oct 24, 2008 8:12 am
- Forum: IDE
- Topic: A Virus in the SwordfishIDE.exe?
- Replies: 3
- Views: 3718
A Virus in the SwordfishIDE.exe?
Hi all,
since yesterday I very often get the following message from Avira AntiVir:
"In the File 'C:\Program Files\Mecanique\Swordfish\SwordfishIDE.exe' found a Virus from type 'TR/Crypt.XPACK.Gen' [trojan]."
Whats this? Did anybody have same problem?
Reguards
Christian
since yesterday I very often get the following message from Avira AntiVir:
"In the File 'C:\Program Files\Mecanique\Swordfish\SwordfishIDE.exe' found a Virus from type 'TR/Crypt.XPACK.Gen' [trojan]."
Whats this? Did anybody have same problem?
Reguards
Christian
- Sat Oct 11, 2008 9:43 am
- Forum: Compiler
- Topic: Clearing a LCD-area as soon as possible
- Replies: 7
- Views: 4259
- Tue Sep 16, 2008 3:54 pm
- Forum: Modules
- Topic: A bug in the GLCD modul!?
- Replies: 1
- Views: 2973
A bug in the GLCD modul!?
Hey all, because I'm searching for a fast solution for my problem (VU- Meter) I played around with the subs and functions of the GLCD modul. Now I found out that the sub 'SQUARE(px,py,psize)' (SQUARE(30,16,5)) only draws a line. The Sub itself looks ok but this sub calls the sub Rectangle wich also ...
- Tue Sep 09, 2008 3:21 pm
- Forum: Compiler
- Topic: Clearing a LCD-area as soon as possible
- Replies: 7
- Views: 4259
- Tue Sep 02, 2008 6:12 pm
- Forum: Compiler
- Topic: Clearing a LCD-area as soon as possible
- Replies: 7
- Views: 4259
- Tue Sep 02, 2008 2:22 pm
- Forum: Compiler
- Topic: Clearing a LCD-area as soon as possible
- Replies: 7
- Views: 4259
Clearing a LCD-area as soon as possible
Hi all, I have build a schematic for a VU-Meter with a PIC and a LCD. It works great but it is a little bit slow. May be someone is able to help me. Here is the code to build the bargraph: ...... Dim ADVUL as byte Dim ADVUR as byte .... Sub ADInAsVURect(value,sline,eline As Byte) Dim x As Integer Fo...
- Fri Jul 11, 2008 5:38 pm
- Forum: Modules
- Topic: adc on PIV 18f2553
- Replies: 6
- Views: 5056
Hallo,
I have had nearby the same problems. David wrote:
CS
I have had nearby the same problems. David wrote:
Hope this helpsYou probably need to take a look at the datasheet, there are quite a few values to play with. You could start by trying something like:
Code: Select all
SetBaudrate(br19200) ADC.SetConvTime(FOSC_8) Repeat ...
CS
- Thu Jun 19, 2008 12:47 pm
- Forum: Modules
- Topic: Problems with ADC-modul!?
- Replies: 2
- Views: 3317
- Thu Jun 19, 2008 9:28 am
- Forum: User Modules
- Topic: Where is the mistake? (Building a Menu and ADC)
- Replies: 1
- Views: 2951
- Thu Jun 19, 2008 9:20 am
- Forum: Modules
- Topic: Problems with ADC-modul!?
- Replies: 2
- Views: 3317
Problems with ADC-modul!?
Hi again, I'm using an EasyPic4 with the PIC 18F4620 at 20MHz. The problem with the ADC: When I use the follwoing code I get values between 0 and 511: Device = 18F4620 Clock = 20 Include "usart.bas" Include "convert.bas" Include "adc.bas" SetBaudrate(br19200) Repeat USART.Write("ADC-Value: ", DecToS...
- Wed Jun 18, 2008 6:43 pm
- Forum: User Modules
- Topic: Where is the mistake? (Building a Menu and ADC)
- Replies: 1
- Views: 2951
Where is the mistake? (Building a Menu and ADC)
Hi all, in the following code there must be a mistake, but where? I use an EasyPic4 with a GLCD on PortB (Data) and PortD(Control). The Display works great but there are two problems: 1. The ADC should display a range between 0 and 1023 but I only get 0 till 511 (With the resistor on the EasyPic4) 2...
- Wed Jun 18, 2008 6:22 pm
- Forum: User Modules
- Topic: 122x32 GLCD with SED1520 lib
- Replies: 4
- Views: 4820
- Wed May 14, 2008 1:04 am
- Forum: Modules
- Topic: A little mistake in the ADC-modul !?
- Replies: 7
- Views: 5302
Hi Francis, of course I made the changes for my own, but I think David will make the changes in the original modul and with the next update the little mistake is away! I have to addmit, that I first thought that my pic is demaged because I was not able to use the external Vref. After long times of r...