Search found 211 matches

by CharlieM
Wed Jul 05, 2023 2:03 pm
Forum: General
Topic: Invalid option
Replies: 7
Views: 2987

Re: Invalid option

Hi Jerry, I got a box full of old devices. I am just using what I have. Thanks for the info about the order of includes and such. The backpack is obsolete and there isn't any info on the web. That's why I figured I would just wright my own firmware. It is turning out to be harder than I thought. All...
by CharlieM
Tue Jul 04, 2023 11:52 pm
Forum: General
Topic: Invalid option
Replies: 7
Views: 2987

Re: Invalid option

HI Jerry, I switched to the 18F2321. I decided to develop for the pic that is on the SGLCD backpack. I commented the code 'Include "intosc.bas" '#option DIGITALIO_INIT = true // automatically call SetAllDigital at startup 'Include "setdigitalio.bas" and checked syntax and all is ok. Is the above cod...
by CharlieM
Tue Jul 04, 2023 7:30 pm
Forum: General
Topic: Invalid option
Replies: 7
Views: 2987

Invalid option

Hello Everyone, These are my fuse settings I got from the fuse config plugin and I get a error message "Invalid Option" for the PBADEN fuse setting. Any Idea Why? Thanks. config OSC = INTIO2, // Internal oscillator block, port function on RA6 and RA7 FCMEN = OFF, // Fail-Safe Clock Monitor disabled ...
by CharlieM
Sat Jul 01, 2023 11:20 pm
Forum: General
Topic: Blink PortB on a 18F2620
Replies: 8
Views: 3789

Re: Blink PortB on a 18F2620

HI Jerry,
I was thinking on just a Basic GLCD serial interface. I looked on SparkFun and found one they sell and found a datasheet of commands. I was was going to doing something that. I plan on having 2 different fonts big numbers and smaller letters. Thanks for the help with this.
by CharlieM
Sat Jul 01, 2023 9:29 pm
Forum: General
Topic: Blink PortB on a 18F2620
Replies: 8
Views: 3789

Re: Blink PortB on a 18F2620

Hi Octal, Hope your doing well. Yea I'm getting somewhere now. I I connected a pickit2 to the EP7 via the ISCP connector and programmed the pic and I now have a flashing portB. The fuse settings were not showing correctly in the EPprogramming software So I updated to 2.90 and now I can't connect the...
by CharlieM
Sat Jul 01, 2023 7:50 pm
Forum: General
Topic: Blink PortB on a 18F2620
Replies: 8
Views: 3789

Re: Blink PortB on a 18F2620

Thanks for the relies. I tried what was mentioned and I still dont any signs of life. What Im doing is I have a Serial GLCD and I don't have the user manual and it is not on the web so I thought I would write my own firmware. I have a 18F2620 in a dip package and a sop. I thought I would do the deve...
by CharlieM
Sat Jul 01, 2023 12:04 pm
Forum: General
Topic: Blink PortB on a 18F2620
Replies: 8
Views: 3789

Blink PortB on a 18F2620

Hello all, I am trying to just blink a led to get a feel for this device. I can't seem to do that. Here is the code I have. I am using internal OSC at 8 mhz and testing on a easypic7 dev board. It works in Pic18 SIM IDE , but does not on hardware. Looking at the datasheet there is no OSCCON, just OS...
by CharlieM
Sun Jun 25, 2023 6:18 pm
Forum: Compiler
Topic: Unkown analog select map
Replies: 5
Views: 2686

Re: Unkown analog select map

Thanks Jerry,

I just moved everything in the user library and everything works as expected. Thanks again.
by CharlieM
Sun Jun 25, 2023 2:36 pm
Forum: Compiler
Topic: Unkown analog select map
Replies: 5
Views: 2686

Re: Unkown analog select map

Hi Jerry, I am running the lastest version of compiler. That is the exact warning message,and here is the code I am messing with. As I mentioned if I change the device type to say 18F4520 then I dont get a warning. Thanks for taking a look at this for me. Device = 18F452 Clock = 8 #option GLCD_DATA ...
by CharlieM
Sat Jun 24, 2023 11:07 pm
Forum: Compiler
Topic: Unkown analog select map
Replies: 5
Views: 2686

Unkown analog select map

Hello Everyone,

ITs good to be back here. I am using a 18F452 and I get this warning and I think it has something to do with the pic I'm using.
If I change it to a 18F4520 then the warning goes away. I am playing around with the GLCD module. any ideas?
by CharlieM
Wed Jun 21, 2023 10:14 pm
Forum: General
Topic: PMs not sending
Replies: 1
Views: 2567

PMs not sending

I tried to send 2 PM to David and they are in my outbox. If I check the sent folder it does not show that they have been sent.
Any Ideas?
by CharlieM
Wed Jun 21, 2023 9:45 am
Forum: Compiler
Topic: install issue
Replies: 1
Views: 2778

install issue

Trying to install SF and I get Activation key expired message. what do I need to do to fix this?

Regards Charlie Moore
by CharlieM
Mon Jan 27, 2014 10:42 pm
Forum: Compiler
Topic: unable to open SF to update
Replies: 3
Views: 3055

Re: unable to open SF to update

Thanks David.
by CharlieM
Mon Jan 27, 2014 11:32 am
Forum: Compiler
Topic: unable to open SF to update
Replies: 3
Views: 3055

unable to open SF to update

Hello everyone,

It has been a while sense I used SF. I see there is a update andn wanted to install it. I tried to open SF and I get "unable to open- update security key missing" Any way to fix this? Thanks.


Charlie
by CharlieM
Mon Jan 07, 2013 11:23 pm
Forum: IDE
Topic: Online updates
Replies: 4
Views: 5450

If you are talking about the dongle then you don't need it any more. David will have to issue you a software key.Just shoot him a email.