Swordfish

Translation by Google, sorry. Hi, I found an interesting problem. PIC18F2550 PIC with a USB interface. Error: whenever I via the USB interface has a name that is 8, 16, 24, 32 bytes long, in the EEProm the CPU to save and then that name again via the USB auslese interface, you add any character back...

PIC18F14K50 and USB Translation by Google, sorry. Hello, the sheet says that the chip has a USB interface. Unfortunately, he is disabled in the inludes file. Can we change this with the new data from Microchip? Here are some of the data sheet. Universal Serial Bus Features: Universal Serial Bus Feat...

Hello, to all those with the PIC 18F2553, and 18F4553 USB HID want to work. I had a problem with the HID keyboard demo. There was always at the same compile error. TXreportram etc. Did the error in the USB config found. Both PIC were not registered. Have changed and now it works. Here is my modifica...

Hello cs and RKP

now everything functions, as it is. The best value is (FOSC_4). With
this value it displays directly 5V. With the other values I come on
4,99V. These adjustments function also with the PIC 18F4553

Again thanks for the fast assistance. Speed 64

RKP,
On the entrance AN2 do I have 0 - 5V. The value by 0 - 2,5V is 0 - 2047. The value by 2,5 - 5V stays by 2047. I have tested AN3 too, but it is the same. The programm runs in a loop and reads in AN2. The programm changes Dec TOSTR and shows it on the LCD.

Thanks RKP
But now is number 2047 shown and not 4096. I use easy pic 3 on AN2 5V.
There is no jumper on port A.

I have this pic with the example from SF tested / programmed?. But it does not work. With a pic 18F2550 does it work. Do anybody have any idea?
Thank you.

Hello, I has a question to the PIC 18f2550. can one at the port C4 and
c5 a serial interface operate.
SUART:
SetTX(PORTC.4) SetRX(PORTC.5)
SetBaudrate(sbr19200)
SetMode(umTrue)
While true UART.Read(Value) UART.Write(Value, 13, 10) turn

Hello, my problem with the driver The original file laest itself without errors does not install. The PC does not announce it would be the correct hardware information in the inf file. I tried the following driver out, go?. My application on the PC does not run thereby yet. With a terminal I get con...

Hello all, I have a problem with the Easypic 3 Bord und the USB key. Each hardware alone works fine, but both together send mistake-message from windows: "code is 10, the driver of easy pic 3 can' t start." My computer has 8 x USB2 and Windows XP. Please, could anybody help me. I solved now the pro...

Hallo, I have a driver problem with a PIC 18F2550 and Windows 2000 pro SP4. The interface is detected, but Windows cannot find a suitable driver. I already executed an update of my software. It does not go. Windows gives me the following message. "Windows which unable to of LOCATES A more driver for...

Hello all,

I have a problem with the Easypic 3 Bord und the USB key.
Each hardware alone works fine, but both together send mistake-message from windows: "code is 10, the driver of easy pic 3 can' t start."
My computer has 8 x USB2 and Windows XP.
Please, could anybody help me.

Hello all,

I have a problem with the Easypic 3 Bord und the USB key.
Each hardware alone works fine, but both together send mistake-message from windows: "code is 10, the driver of easy pic 3 can' t start."
My computer has 8 x USB2 and Windows XP.
Please, could anybody help me.